RD7000+ Precision Cable

Radiodetection’s RD7000+ Underground Utility Locator range delivers accurate, reliable and repeatable performance in an easy-to-use digital package.

The RD7000+ range offers four lightweight, easy to use locators, optimised for use in construction, pipeline, power and telecom industries. These locators are ergonomically designed to provide the operator with a device which is responsive and intuitive, while the large backlit LCD screen provides clear information in any light condition. The interface has easily identifiable icons, which are consistent across both the locator and transmitter range for ease of operation.

  • Centros™: RD7000+ locators are Centros™ enabled. Centros™ is a measurement engine based on more than 30 years of continuous development, combining new and innovative algorithms with tried and tested software in a high performance microprocessor. Centros™ improves locator accuracy and repeatability, delivering timely responsiveness.
  • Compass: Allows the target line to be quickly and easily followed by indicating the orientation of the target cable or pipe and the locator on the screen. This helps to improve accuracy when measuring depth.
  • Dynamic Overload Protection: Extends the RD7000+ locator capability into areas where other locators fail by automatically filtering out large and unwanted signals aiding accurate location even in electrically noisy environments.
  • Peak/Null Mode: Helps to identify the effects of distortion due to ground effects or nearby utilities. Simultaneous display of peak bar graph response and proportional null arrows allow a quick assessment of locate conditions.
  • Remote Calibration: Using the Windows software, locators can be checked for correct calibration and operation over the Internet without the need to return the RD7000+ for service. A calibration certificate can be saved, emailed or printed or a service can be booked should any issue be detected.
  • Extended Warranty: Radiodetection offers a free upgrade to a 3 year extended warranty on RD7000+ locators and transmitters (product must be registered within 3 months of service). Registration also offers free product software and feature upgrades.
  • Marker Locator: The RD7000+ marker locator models detect all commonly used RF utilities markers. TruDepth™ automatic depth estimation without the need for two step measurements allows for faster & more accurate surveys. Combined mode allows scanning for cables, pipes and markers simultaneously.
  • Data Logging: On board memory (PLM and TLM models) can store over a year’s worth of locate history at one second intervals. Data can be backed up to a PC at any time giving virtually unlimited record keeping for the life of the product. Retrieved data can be analysed for compliance or training requirements.
Features are model dependant
Sensitivity 5μA at 1 meter (33kHz)
Dynamic range 140dB rms/√Hz
Selectivity 120dB/Hz
Maximum depth(1) Line: 20' / 6m
Sonde: 50' / 15m
RF Markers:
Near Surface: 2' / 60cm
Ball Marker: 4.9' / 1.5m
Mid-Range: 5.9' / 1.8m
Full Range: 7.9' / 2.4m
Depth accuracy(2) Line: ± 5% tolerance 4" / 0.1m to 10' / 3m
Sonde: ± 5% tolerance 4" / 0.1m to 23' / 7m
RF Markers: ± 15% ± 2" / 5cm up to the maximum depth
Locate accuracy ± 5% of depth
Fault-Finding (FF) Diagnose cable sheath faults from short circuit to 2MΩ using the A-frame
Max Transmitter Power output 1W (Tx-1), 5W (Tx-5 and Tx-5B), 10W (Tx-10 and Tx-10B)
Dynamic overload protection 30dB (automatic)
Batteries Cable and Pipe Locator: 2 x D-cells (LR20) or optional Li-Ion battery pack                                        
Marker locator: Li-Ion battery pack or 3 x D-cells (LR20)
Transmitter: 8 x D-cells (LR20) or optional Li-Ion battery pack
Battery Life (continuous usage)(3) Cable and Pipe Locator: Alkaline up to 13 hours
Marker Locator: Li-Ion or Alkaline up to 25 hours
Transmitter: Alkaline up to 23 hours
Warranty 12 Month standard, 36 Months upon registration
Compliance FCC, RSS 310 RoHS, Weee, CE, Bluetooth
Weight Cable and Pipe Locator: 4.2lbs / 1.9kg (including alkaline batteries)
Marker Locator: 4.6lbs / 2.1kg (including Li-Ion battery pack)
Transmitter: 6.2lbs / 2.8kg (including alkaline batteries)
9.3lbs / 4.2kg (including accessories)
Dimension (H x D x W) Cable and Pipe Locator: 25.5" x 11.3" x 4.9" / 648 x 286 x 125mm
Marker Locator: 25.5" x 11.3" x 7" / 648 x 286 x 177mm
Transmitter: 14" x 8.9" x 8.1" / 356 x 227 x 207mm
Construction Injection Molded ABS Plastic
Ingress Protection IP54
Operating Temperature 14 to 122°F / -10 to 50°C

RD7000+ SL/SLM
Construction Industry

A broad range of standard active frequencies and the rugged construction common to all Radiodetection locators makes the RD7000+ SL and SLM - featuring RF marker locating - reliable and versatile locators for the construction industry.

RD7000+ DL/DLM
Water Industry

Incorporating several features specifically designed for users working in pipe location and inspection, and supported by the wide range of Radiodetection accessories, the RD7000+ DL and DLM are the ideal locators for the water industry.

RD7000+ PL/PLM
Power Industry

Designed specifically for the power industry with tailored features and a range of compatible accessories designed for power applications, the RD7000+ PL and PLM also features fault find capability, enabling cable faults to be precisely located.

RD7000+ TL/TLM
Telecom Industry

High impedance sheathed telecoms cables make location a real challenge. With a range of locate frequencies extending up to 200 kHz and fault finding capabilities, the RD7000+ TL and TLM have been designed to address the needs of users tasked with locating and maintaining such cables.

PLM and TLM models also feature automatic usage logging at 1/sec as standard, and convenient service reminders (CALSafe™).